Mobile 60 S4
Mobile 60 S4
Semix Mobile 60S4 Concrete Batching Plants with an output of 60 m³/h is providing the best cost effective solution thanks to its’ patented inline aggregate bin design.
In SEMIX Mobile 60S4 batching plants, only one ramp needed for feeding aggregate bins thanks to its’ patented design.
Inline aggregate bin structure eliminates the need of installing a pre-feeding conveyor
Semix Mobile 60S4 can be rapidly assembled in 2 days with its’ compact design. It can be relocated to another project easily because of its’ high mobility.
SEMIX is able to design special projects for your requirements with a strong engineering team.
In SEMIX Mobile 60 Concrete Batching Plants, 1 m³ of compacted concrete output capacity mixers are preferred. Depending on requirements, single shaft, twin shaft or planetary mixers can be adapted to the Mobile 60S4 batching plant. The mixing process is controlled electronically by a mixer-control unit software , which performs as a full automatic unit.
Our worldwide solutions
Brand & Model
Semix SM 1500 / 1000 lt – HorizontalLoading Capacity
1500 ltCompacted Concrete Capacity
1000 ltElectric Motor
37 kW GAMAK/VOLT-1 Unit, with thermic overload switch protectionBrand & Model : | Semix SM 1500 / 1000 lt – Horizontal |
Loading Capacity : | 1500 lt |
Compacted Concrete Capacity : | 1000 lt |
Electric Motor : | 37 kW GAMAK/VOLT-1 Unit, with thermic overload switch protection |
- Mixing Blade : Ni-Hard 4 (Chrome, Nickel special alloy cast iron)
- Stripping Blade : Ni-Hard 4 (Chrome, Nickel special alloy cast iron)
- Internal Wearing : HARDOX 450
- Ni-Hard 4 : In all SEMIX Concrete Mixers, Ni-Hard 4 alloys are being used in mixer blades. NiHard 4 is a high-strength cast iron alloy that contains 4% nickel and has a tensile strength of up to 1,200 MPa. The nickel in NiHard 4 creates a tough surface that resists abrasion, while the hardening agents make the alloy harder and more resistant to deformation. This structure is ideal for products under conditions of high abrasiveness and high impaction conditions. It is commonly used in applications that require high strength. NiHard 4 has a very low coefficient of thermal expansion, which makes it ideal for use in high-temperature applications. NiHard 4 is a type of steel that is very strong and resistant to wear and tear. It is commonly used in industrial applications where durability is key.
- Lubrication : 4 Points Automatic Lubrication System SKF - LINCOLN (German)
Automatic lubrication system is integrated with the PLC and SCADA, the system periodically lubricates the necessary points and preventing from major problems. These systems use sensors to detect the level of lubricant present and dispense the appropriate amount automatically.
Discharge Door
1 Unit / HydraulicDischarging in Emergency Situations
Present - Manual PumpWater Dispenser
Present - 1 UnitEmergency Stop Button
Present - 1 UnitMaintenance Door Safety Switch
Present - 1 UnitDischarge Door : | 1 Unit / Hydraulic |
Discharging in Emergency Situations : | Present - Manual Pump |
Water Dispenser : | Present - 1 Unit |
Emergency Stop Button : | Present - 1 Unit |
Maintenance Door Safety Switch : | Present - 1 Unit |
General view
The main chassis was built in compliance with international requirements with a transition height of 4,100 mm to 4,250 mm with high-quality steel components and outstanding workmanship. For maneuvering and filling the truck mixer with an average width of 5,000 mm, the main chassis offers great ease. A platform, handrails, and stairs are built into the main chassis.Supports of the chassis
UNP & INP profiles with extra cross braces.Concrete discharge funnel
1 Unit for quick cleaning with inlaid, galvanized bar construction. Highly wear-resistant coating.Walkways, stairs & railings
At the mixer and at the upper weighing frame, walkways, and platform. 60 ° staircase with grating steps and railings to the mixer floor, with top landing and 60 ° grade tilt.General view : | The main chassis was built in compliance with international requirements with a transition height of 4,100 mm to 4,250 mm with high-quality steel components and outstanding workmanship. For maneuvering and filling the truck mixer with an average width of 5,000 mm, the main chassis offers great ease. A platform, handrails, and stairs are built into the main chassis. |
Supports of the chassis : | UNP & INP profiles with extra cross braces. |
Concrete discharge funnel : | 1 Unit for quick cleaning with inlaid, galvanized bar construction. Highly wear-resistant coating. |
Walkways, stairs & railings : | At the mixer and at the upper weighing frame, walkways, and platform. 60 ° staircase with grating steps and railings to the mixer floor, with top landing and 60 ° grade tilt. |
Cement Weighing Capacity
600 kgCement Weighing Load-cells
3 units 500 kgWater Weighing Capacity
300 kgWater Weighing Load-cells
2 units 500 kgAdditive Weighing Capacity
1-2 x 20 ltAdditive Weighing Load-cells
1 unit 100 kgCement Weighing Capacity : | 600 kg |
Cement Weighing Load-cells : | 3 units 500 kg |
Water Weighing Capacity : | 300 kg |
Water Weighing Load-cells : | 2 units 500 kg |
Additive Weighing Capacity : | 1-2 x 20 lt |
Additive Weighing Load-cells : | 1 unit 100 kg |
Cement Discharge Valve
Ø 200 mm Butterfly Type - WAM (Italy)Cement Hopper Vibrator
1 unit - OLI (Italy)Water Discharge Valve
Ø 150 Butterfly Type mm - WAM (Italy)Additive Discharge Valve
1 Unit - 1 ½” ball valve with actuatorCement Discharge Valve : | Ø 200 mm Butterfly Type - WAM (Italy) |
Cement Hopper Vibrator : | 1 unit - OLI (Italy) |
Water Discharge Valve : | Ø 150 Butterfly Type mm - WAM (Italy) |
Additive Discharge Valve : | 1 Unit - 1 ½” ball valve with actuator |
Aggregate Bins Capacity&Quantity
40 m³ – 10 m³ capacity each one – 4 bins (Linear)Bunker Discharging Gate(s)
1 Gates in each bin – Totally 4 Discharging GatesVibrator Brand & Capacity
350/3 – 2 Units WAM-OLI (Italy)Pneumatic Piston Brand & Capacity
DSBC 80-250 Piston 4 Units – Festo (Germany)Pneumatic Valve
4 Units – Festo (Germany)Aggregate Bins Capacity&Quantity : | 40 m³ – 10 m³ capacity each one – 4 bins (Linear) |
Bunker Discharging Gate(s) : | 1 Gates in each bin – Totally 4 Discharging Gates |
Vibrator Brand & Capacity : | 350/3 – 2 Units WAM-OLI (Italy) |
Pneumatic Piston Brand & Capacity : | DSBC 80-250 Piston 4 Units – Festo (Germany) |
Pneumatic Valve : | 4 Units – Festo (Germany) |
With trapezoidal bending for aggregate bin covers a high strength can be reached. In SEMIX's aggregate storage hoppers, extra reinforcement steels are welded to the empty spaces in the trapezoid. Thanks to this method, aggregate storage bins can serve long years.
Belt Quality
EP 125 / 4 coatsLoad-cell
Capacity of 2000kg - 4 UnitsMotor Power/Gearbox
7,5 kWVibrator
350/3 – 2 Units - WAM-OLI (Italy)Drums
10 mm Rubber CoatedBearings
Lubrication Grease Nipple over SNH seriesScraper
V type with its weights -1 UnitEmergency Stop Button
1 UnitPull-rope Switch
1 UnitBelt Quality : | EP 125 / 4 coats |
Load-cell : | Capacity of 2000kg - 4 Units |
Motor Power/Gearbox : | 7,5 kW |
Vibrator : | 350/3 – 2 Units - WAM-OLI (Italy) |
Drums : | 10 mm Rubber Coated |
Bearings : | Lubrication Grease Nipple over SNH series |
Scraper : | V type with its weights -1 Unit |
Emergency Stop Button : | 1 Unit |
Pull-rope Switch : | 1 Unit |
Belt Quality
EP 125 / 4 coatsMotor Power
11 kW - 1 UnitDrums
10 mm Rubber CoatedBearings
Lubrication Grease Nipple over SNH seriesScraper
V type with its weights -1 UnitEmergency Stop Button
1 UnitPull-rope Switch
1 UnitCovering over the Belt
Semi-closed with steel sheetBelt Quality : | EP 125 / 4 coats |
Motor Power : | 11 kW - 1 Unit |
Drums : | 10 mm Rubber Coated |
Bearings : | Lubrication Grease Nipple over SNH series |
Scraper : | V type with its weights -1 Unit |
Emergency Stop Button : | 1 Unit |
Pull-rope Switch : | 1 Unit |
Covering over the Belt : | Semi-closed with steel sheet |
Click to see our worldwide distributors, SEMIX will be ready to provide tailor-made solutions wherever you are.
Find a Dealer Now